10 Power Outage Safety Tips for Small Businesses

For small businesses, a simple power outage can cause many problems like productivity loss, customer loss etc. And all these things affect the total revenue of the company. Follow 15 tips outlined in this article to minimize the impact of power outage:

1. Have a Plan Ready for Power Outage

If power failures are frequent in your area then you should have a proper plan. You can then work according to that plan.

2. Make Sure Your Employees are Safe

Ensure that in the event of power outage, customers and employees don’t use elevators. Also don’t let them touch the electric wires. Keep a safe water kit in the office.

3. Have a Rental Generator ready

You should have at least one generator hire services provider in your contact list for these types of emergencies. You can call your services provider and ask him to deliver the generator sets at your workplace.

4. Have an Emergency Kit Ready

Make sure you have first aid kit, water kit and general maintenance kit in your workplace.

5. Consider Batter Power Security Systems

Security is the top priority so make sure you have battery powered security system so when power goes out, security system will still work.

6. Operate the Generator Safely

You should have a person in your team who knows how to operate the generator safely. If you have a generator ready for power outage, you should regularly check the generator.

7. Report the Power Outage

You should call the electricity company and report the power outage. 

8. Turn Off All the Computers and Appliances

If there is a sudden spike in power levels then your electric devices will not damage if you turn them off beforehand.

9. Check the equipment when power is restored

Don’t forget to check all the equipment once the power is restored.

10. Turn off the generator safely

Generators should be turned off safely after power is restored. Make sure you and your employees know how to turn off and store the generator safely.

We hope that above mentioned tips will help you in keeping your workplace safe during power outage.

Event Planning: Electrical Installations and Lighting

When you are planning an event, lighting is one of the most important criteria that have to be kept on the mind. Be it some outdoor event or indoor ones; you need to ensure that there is proper lighting because there is going to be a huge gathering. 

Along with light, there will be other electrical installations like mic, etc., which should be taken care of. There are a lot of things like planning, logistics, management, installments, consulting, safety, generators etc. which has to be considered while you are taking care of the power. You should also look for backup and standby in case of an emergency. 

Now, you can either have a fixed system which will cater to the needs or have any temporary system where you need to supply electricity. Let us see how you can take care of either. You can also look for event equipment hire London to get better supplies.

For a permanent supply of electricity

• This is mainly required for places where there are vents taking place on some regular basis, like sports, scheduled events, conventions etc. When you are deciding the lighting of such sites, you need to consider some viewing angles which are necessary. For example, if it is a stadium where there are regular sports taking place, you need to keep in mind the viewing angles of the players, spectators, etc. You will also have to ensure that it doesn't cause any hindrance while the event is being broad cast on TV and there is minimum objectionable glare. 

• The uniformity of the light is also an essential feature that needs to be checked. There has to be an appropriate amount of vertical and horizontal illumination so that the three-dimensional image of an object is revealed. The modeling effect of the light should be good enough so that the player doesn't face any inconvenience.

For a temporary supply of electricity

• You need to ensure that all the wiring is installed safely by the electrician. He should be an experienced one, and you should always have a written certificate as proof that the work is done correctly.

• You need to have a proper earthing system device so that there is no big mishap in case of emergency. You need to install a Residual Circuit Breaker (RCB) which has a maximum of 30 amp per trip. 

• There are different types of connectors as well which can be used and you need to ensure that you use the correct type of connector so that it suits the external conditions and doesn't cause any damage in the insulation.

• You should also ensure that there is a generator that is electrically safe. Make sure you have a certification that claims that is safe to be used.

• You also need to consider a few things before doing the installation, like the location of the existing power lines or any buried cables.

• You will also need generators and proper earthing system to ensure a convenient supply of power and safety.

• The positioning of the temporary underground and overhead wires should be done carefully after examining these.

These are some of the features that need to be considered before going for electrical and light installments in an event. Make sure you take care of the safety before proceeding in further work.

Lighting Tower Safety and Operational List

Safety at the worksite is one of the biggest priorities that should be maintained. People generally forget to install light towers at their work site and it is mostly an afterthought that comes to our mind. We then think that we should have installed the light towers. Just like flashlights, light towers form a crucial part of worksites when the sun goes down.

The most common light towers are equipment designed like a diesel run generator, that also carries a lighting element. Some tower light hire UK also come with auxillary power source that can be used when there is a power cut at the job site. This means that these light towers work as generators when needed.

Operation of the light towers

When you have moved the machine onsite, you need to set it up properly. This set up is the process between getting the machine to the job site and starting it. The position of the lights matters a lot, you should ensure that the mast is raised properly, and lights are positioned at the desired location. After setting the machine in the right position, you need to ensure that all the switches are turned off before you start the machine. If you are using the light towers for the first time, it is better to refer to the manufacturer's manual before starting the machine. 

After you start the machine, you should let it run empty for a few minutes before applying the load.

Your machine can use a lot of power if you are using it for lighting bulbs. Generally, a light tower bulb can work up to 1000 hours, but if you use it intensely, there are chances of its breakdown.

Maintenance of light tower

There are several filters in the machine. Proper maintenance and upkeep of the light tower will ensure that you are cleaning the fuel and air filters properly. You can reduce the work of cleaning the filters if you use clean and efficient fuel for running the machine. This is also a part of the maintenance of the light tower.

The light tower manufacturers also provide a safety guide along with the equipment. Some of the safety procedures that you should keep in mind while using light towers are: 

1. You should always wear safety equipment while you are operating the equipment. 

2. Generally, the safety gear includes, goggles, dust masks, ear plugs, safety gloves, and hats. 

3. You should not use the light tower when you are under the influence of alcohol or drugs.

4. When you are refuelling the light tower, you should close the engine. 

5. Some engine components get hot after use, you should not touch them else you will burn yourself.

6. You should take extra care while lighting any fire near the battery of the light tower. When you are servicing the light tower, disconnect the battery terminals. 

Before you proceed with the maintenance work of the light tower, make sure that you have shut down the machine so that it cools off. It is safe to touch the machine parts only when it is cooled down.